Fixtures & Service Calls

Water Heater Repair & Installation

When you need it: No hot water, rusty water from hot taps, strange noises from the tank, leaking around the base, or a unit past its lifespan (typically 8–12 years).

How we do it

1. 1Diagnose the issue (thermocouple, element, sediment, or tank failure)
2. 2Recommend repair or replacement based on age and condition
3. 3Install new unit if needed — tank or tankless options available
4. 4Test, adjust temperature, and verify safe operation

Tank water heaters lose efficiency over time due to standby heat loss. If your unit is over 10 years old, a replacement (or upgrade to tankless) often pays for itself in energy savings.

Faucet Replacement & Repair

When you need it: Dripping faucets, low flow, handles that won't turn, or you're ready for an upgrade during a kitchen or bath renovation.

How we do it

1. 1Shut off water supply to the fixture
2. 2Remove the old faucet and clean the mounting surface
3. 3Install the new faucet with proper connections and seals
4. 4Test for leaks and verify hot/cold operation

Toilet Repair & Installation

When you need it: Running toilet, weak flush, cracks in the bowl or tank, persistent leaks at the base, or replacing an old unit.

How we do it

1. 1Diagnose the issue (flapper, fill valve, wax ring, or structural)
2. 2Repair or replace the faulty component
3. 3For full replacement: remove old unit, set new wax ring, install and level
4. 4Test flush and check for leaks

General Plumbing Repairs

When you need it: Leaking pipes under sinks, garbage disposal issues, shut-off valve replacement, hose bib repair, or any general plumbing problem.

How we do it

1. 1Assess the issue and provide an upfront quote
2. 2Complete the repair with quality parts
3. 3Test and verify the fix
4. 4Clean up and walk you through what was done